|
 With over 17 years of experience in trade licensing, Contractor School Online (CSO) is your primary resource to help you pass your state contractor license exam! We offer Online Practice Tests, study materials, books and more.
To become a certified contractor in Alabama, depending on the trade you are interested in, you may be required to pass a trade exam and Business, Law and Management. Use our
Information Request Form
to find out more.
Contractor School Online (CSO) will
assist you with their professional consultants and provide
study materials, also
practice tests for the Business, Law, and
Management and your trade if available.
If purchases are made elsewhere make sure the correct
author, title and year are appropriate for the trade.
CSO Business, Law and Management Practice Test coincides
with the required State Contractor’s Manual.
Please note: Inventory
Pricing - Contractors State Bonding and Subjects may change
without notice.
($75)
Content
-
Business, Law and Management Online Practice Test
-
3 Months Access, Available 24/7
|
|
($95)
Content
-
General Law Online Practice Test
-
3 Months Access, Available 24/7
|
|
($48.50)
Content
-
Business, Law and Management Manual
|
|
($174)
-
Business, Law and Management Online Practice Test
-
3 Months Access, Available 24/7
-
Business, Law and Management Manual
|
|
($95)
Content
-
General Carpentry Online Practice Test
-
3 Months Access, Available 24/7
|
|
($95)
Content
-
Home Builders and Remodelers Online Practice Test
-
3 Months Access, Available 24/7
|
|
($95)
Content
-
Framing, Millwork, Cabinets and Finish Online Practice Test
-
3 Months Access, Available 24/7
|
|
($95)
Content
-
Home Builder Online Practice Test
-
3 Months Access, Available 24/7
|
|
($95)
Content
-
Residential Homebuilders and Remodelers Online Practice Test
-
3 Months Access, Available 24/7
|
|
($105)
Content
-
Low Voltage Online Practice Test
-
3 Months Access, Available 24/7
|
|
($105)
Content
-
Electrical Online Practice Test
-
3 Months Access, Available 24/7
|
|
($105)
Content
-
Heating and Air Conditioning Online Practice Test
-
3 Months Access, Available 24/7
|
|
($95)
Content
-
Plumbing Online Practice Test
-
3 Months Access, Available 24/7
|
|
($155)
-
Business, Law and Management Online Practice Test
-
General Carpentry Online Practice Test
-
3 Months Access, Available 24/7
|
|
($150)
-
Business, Law and Management Online Practice Test
-
Home Builders and Remodelers Online Practice Test
-
3 Months Access, Available 24/7
|
|
($150)
-
Business, Law and Management Online Practice Test
-
Plumbing Online Practice Test
-
3 Months Access, Available 24/7
|
|
($203.50)
-
Business, Law and Management Online Practice Test
-
Plumbing Online Practice Test
-
3 Months Access, Available 24/7
-
Business, Law and Management Manual
|
|
($65)
-
Business, Law and Management Manual
|
|
($106)
-
Carpentry and Building Construction Manual
|
|
($55)
-
Codes Federal Regulations Book
|
|
($25)
-
Practice for Handling, Installing, and Bracing of Metal Plate Connected Wood Trusses
|
|
($85)
-
Guide to Quality Concrete Book
|
|
($105)
-
International Residential Code (paperback)
|
|
($103)
|
|
($48)
-
Pipe and Excavation Contracting Book
|
|
($552)
-
Home Builders Combo Books
|
|
Alabama State
Trades, Exams and Summary Information
Contractor School Online (CSO) will assist you with their professional consultants and provide study materials, also practice tests for the Business, Law and Management, trade if available. If purchases are made elsewhere make sure the correct author, title and year are appropriate for the trade. CSO Business, Law and Management Practice Test coincides with the required State Contractor?s Manual
Please note: Inventory Pricing - Contractors State Bonding and Subjects may change without notice.
Prepare For Your Examination
Use the examination content outlines provided in this bulletin as the basis of your study. Use the Alabama Contractor Book to prepare for the examination.
Take Your Examination:
You must bring two forms of identification, which bear your signature. One of these must also have your photograph. Your name as shown on the application form must exactly match the name on the photo I.D. used when checking in at the examination site.
After Your Examination:
Upon passing the examination, your results will be made available to the State to access.
The State will process the remainder of the license application package and notify you upon license approval.
SCORE REPORTING
Your score will be given to you immediately following completion of the examination. The following summary describes the score reporting process:
On screen - your score will appear immediately on the computer screen. This will happen automatically at the end of the time allowed for the examination; if you are using review features, you will be able to obtain your score immediately when you indicate that you have finished and would like to see your results. If you pass, you will immediately receive a successful notification. If you do not pass, you will immediately receive an unsuccessful notification on the screen along with a diagnostic report indicating your strengths and weaknesses by examination type.
EXAMINATIONS CONTENT OUTLINE
BUSINESS, LAW and MANAGEMENT EXAMINATION (FORMERLY
(GENERAL CONTRACTOR EXAMINATION) (Required of all general contractors)
Number of Questions - Minimum -Passing Score - Time Allowed
50 70% 120 Minutes
CONTENT OUTLINE
State Contractor?s Business, Law and Management
Contractor School Online Business, Law and Management Practice Test coincides with the required State Contractor?s Manual.
Subject Area Number of Items
Licensing 8
Estimating and Bidding 5
Liens 2
Financial 5
Payroll and Taxes 6
Personnel and Labor 5
Project Management 3
Contracts 6
Business Organization 2
Risk Management 4
Safety Recordkeeping and Environmental 4
REFERENCE LIST
The reference material listed below was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION
BUILDING CONSTRUCTION (COMMERCIAL)
Number of Questions - Minimum Passing Score - Time Allowed
115 81 330 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Estimating, Bidding, and Preconstruction Services 23
Project Management 28
Project Construction 32
Project Closeout 9
Business and Financial Management 23
REFERENCE LIST
The reference material listed below was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference material is allowed in the examination center:
Handling, Installing, Restraining, and Bracing of Metal Plate Connected Wood Trusses
Construction Management
Erectors of Pre-Cast Concrete Products Training and Certification of Field Personnel for Un-bonded Post-Tensioning
Management of Construction Projects
Book of Construction with Steel Deck
Pipe and Excavation Contracting
Gypsum Construction
Reinforcing Bars
Masonry - Brick, Block and Stone
Principles of Commercial Construction
Federal Regulations
Carpentry and Building Construction
Accessible and Usable Buildings and Facilities
Roofing Construction and Estimating
Concrete Construction
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER
BUILDING CONTRACTOR UNDER FOUR STORIES
Number of Questions - Minimum Passing Score - Time Allowed
90 70% (63 correct) 230 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Sitework, Footings and Foundation 8
Concrete and Concrete Reinforcement 8
Metals 5
Masonry 6
Carpentry 16
Roofing 10
General Code and Construction Knowledge 20
Associated Trades 10
OSHA Safety 7
REFERENCE LIST
The reference material listed below was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference material is allowed in the examination center
Federal Regulations
Carpentry and Building
Handling, Installing, Restraining, and Bracing of Metal Plate Connected Wood Trusses
Concrete Construction
Brick, Block and Stone
Pipe and Excavation Contracting
Gypsum Construction
Erection of Steel Joists and Joist Girders
Construction with Steel Deck· International Energy Conservation Code
Building Code
Residential Code for One-and Two-Family Dwellings
Building Code Masonry Structures
Building Code Requirements for Structural Concrete
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION
CARPENTRY AND FRAMING CONTRACTOR
Number of Questions Minimum - Passing Score - Time Allowed
60 70% (42 correct) 180 Minutes
CONTENT OUTLINE
Subject Area - Number of Items
Estimating and Plan Reading 9
Layout 7
Walls 14
Floors and Stairs 13
Roofs 12
OSHA Safety 5
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference material is allowed in the examination center
Building Code
Residential Code for One-and Two-Family Dwellings
Carpentry and Building
Federal Regulations
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION
COMMERICIAL SWIMMING POOL CONTRACTOR
Number of Questions - Minimum - Passing Score - Time Allowed
50 70% (35 correct) 150 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Plan Reading and Estimating 3
Sitework and Excavating 9
Forming and Reinforcing 9
Concrete 8
Shotcrete 8
Pool Equipment, Including ADA (No Plumbing or Electric) 8
Safety, Including CFR, Pool and Security Fencing 5
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference material is allowed in the examination center
Building Code
Residential Code for One- and Two-Family Dwellings
Federal Regulations
Certified Pool-Spa Operators
Concrete Mixtures
Reinforcing Bars
Shotcrete
Pipe and Excavation Contracting
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER:
CONCRETE CONTRACTOR
Number of Questions - Minimum Passing Score - Time Allowed
60 70% (42 correct) 150 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Estimating and Plan Reading 10
Layout and Excavation 12
Formwork 8
Reinforcing Steel 8
General Concrete 16
Safety 6
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference material is allowed in the examination center
Federal Regulations
Concrete Mixtures
Pipe and Excavation Contracting
Building Code
Residential Code for One- and Two-Family Dwellings
Formwork for Concrete
Reinforcing Bars
Building Code Requirements for Structural Concrete
CONCRETE PAVEMENT CONTRACTOR
Number of Questions - Minimum Passing Score - Time Allowed
100 70% (70 correct) 240 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Water and Sewer 16
Gas 8
Paving 12
Excavation, Compaction, and Grading 12
Safety 7
Steel 12
Piles 4
Concrete 17
Traffic Control 3
Welding 6
Al One Call 3
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference material is allowed in the examination center:
Placing Reinforcing Bars
Federal Regulations
Ductile Iron Pipe
Pipe and Excavation Contracting
Pipe Welding
Hot Mix Asphalt Paving
Pipefitter's
Erection of Steel Joists and Joist Girders
Code for Pressure Piping - Gas Transmission and Distribution Piping Systems
Training and Certification of Steel Personnel for Un-bonded Post-Tensioning
Concrete Pipe & Box Culvert
Concrete Mixtures
Formwork for Concrete
Alabama 1Call - Dig Safely
THESE REFERENCES WILL NOT BE AVAILABLE IN THE
CONVEYING CONTRACTOR
Number of Questions - Minimum Passing Score - Time Allowed
40 70% (28 correct) 120 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Installation 12
Systems and Equipment 8
Tools and Fasteners 5
Safety 4
Maintenance and Troubleshooting 4
Electrical 3
Welding 4
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or genera industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference material is allowed in the examination center:
Contren Learning Series - Conveyors
Contren Learning Series - Troubleshooting and Repairing Conveyors Welding
Federal Regulations
Specification for Structural Joints
Safety Standard for Conveyors and Related Equipment
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER:
DOORS, WINDOWS, AND GLASS WITH SPECIALTY HARDWARE CONTRACTOR
Number of Questions - Minimum Passing Score - Time Allowed
60 70% (42 correct) 150 Minutes
CONTENT OUTLINE
Subject Area Number of Items
General Glazing 10
Glass Systems 10
Metal Framing 4
Plastics / Acrylics 3
Sealant Installations 3
Safety 4
Code Requirements 6
Doors and Frames 10
Hardware 6
Special Doors 2
Overhead Garage Doors 2
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference material is allowed in the examination
Federal Regulations
Building Code
Residential Code for One- and Two-Family Dwellings
Carpentry and Building
Glass Installer Reference
Glass & Glazing Requirements of the Model Building Codes
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAM
DRAINAGE AND CULVERT CONTRACTOR
Number of Questions - Minimum - Passing Score - Time Allowed
30 70% (21 correct) 75 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Earthwork/Surveying 8
Concrete 5
Curbs and Gutters 5
Culverts 3
One Call 5
Heavy Equipment/Safety 4
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference material is allowed in the examination center:
Alabama 1Call - Dig Safely
Federal Regulations
Concrete Mixtures
Pipe and Excavation Contracting
Construction of Urban Storm Water Management Systems
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER:
DRAINAGE, IRRIGATION AND FLOOD CONTROL CONTRACTOR
Number of Questions - Minimum Passing Score - Time Allowed
45 70% (32 correct) 120 Minutes
CONTENT OUT LINE
Subject Area Number of Items
Sitework 11
Concrete 10
Curbs and Gutters 4
Culverts 3
One Call 3
Heavy Equipment/Safety 4
Irrigation 10
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK
The following reference material is allowed in the examination center:
Alabama 1Call - Dig Safely
Federal Regulations
Pipe and Excavation Contracting
Irrigation Design
Concrete Mixtures
Construction of Urban Storm Water Management Systems
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER
ELEVATOR AND ESCALATOR CONTRACTOR
Number of Questions - Minimum Passing Score - Time Allowed
50 70% (35 correct) 120 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Wire Rope 2
Clearance and Space Limits 6
Electrical 6
Testing 3
Engineering and Inspection 5
Safety Devices 8
Controls 3
Operating Limitations 2
Drive Mechanisms 3
Fire Service 3
Maintenance and Repairs 5
Escalators and Dumbwaiter 2
Emergency Power 2
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference material is allowed in the examination center:
Safety Code for Elevators and Escalators
Safety Code for Existing Elevators and Escalators
Elevator and Escalator Electrical Equipment
Electrical Code
Elevator Manufacturing Industry's Installation
Code for Elevators and Escalators
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER:
EROSION CONTROL AND MOWING CONTRACTOR
Number of Questions - Minimum Passing Score - Time Allowed
40 70% (28 correct) 120 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Trees and Shrubs 8
Grass and Ground Cover 10
Drainage and Grading 7
Hardscaping 6
Regional Plants 5
Soils and Amendments 4
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference material is allowed in the examination center
Landscaping Principles
Tough-As-Nails
Landscape Construction
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER
FOUNDATIONS, PILINGS, AND COFFERDAMS WITH RETAINING WALLS CONTRACTOR
Number of Questions - Minimum Passing Score - Time Allowed
50 70% (35 correct) 130 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Excavation and Grading 8
Piles 4
Concrete 6
Metals including Concrete Reinforcement 5
Heavy Equipment/Safety 4
One Call 3
Erosion and Sedimentation Control 6
Tunneling 4
Concrete Formwork 4
Pre-Cast Pre-Stressed Concrete Erecting 6
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference material is allowed in the examination center:
Federal Regulations
Construction Planning, Equipment, and Methods
Pipe and Excavation Contracting
Concrete Mixtures
Placing Reinforcing Bars
Training and Certification of Field Personnel for Un-bonded Post-Tensioning
Jacked Tunnel Construction
Alabama 1Call - Dig Safely
Storm Water Management for Construction
Formwork for Concrete
Erection of Pre-Cast Concrete Products
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER:
GAS AND OIL PROJECTS CONTRACTOR
Number of Questions - % Required to Pass - Time Allowed
50 70% (35 Correct) 120 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Excavation 16
Tank Installation and Testing 14
Piping. Pumps, and Controls 5
Troubleshooting and Maintenance 4
Safety and Fire Prevention 8
Leak Detection and Monitoring Systems 3
REFERENCE LIST
The reference material listed below was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference materials are allowed in the examination center:
Flammable and Combustible Liquids Code
Code for Motor Fuel Dispensing Facilities and Repair Garages
Practices for Installation of Underground Liquid Storage Systems Petroleum Equipment
Installation of Above ground Storage Systems for Motor Vehicle Fueling Petroleum Equipment
Testing of Electrical Continuity of Fuel-Dispensing Hanging Hardware Petroleum Equipment
Petroleum Equipment Lexicon the definitive dictionary of terms used in petroleum marketing operations
Federal Regulations
Pipe and Excavation Contracting
Alabama 1Call - Dig Safely
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER:
HARD TILE AND STONE CONTRACTOR
Number of Questions - % Required to Pass - Time Allowed
50 70% (35 Correct) 120 Minutes
CONTENT OUTLINE
Subject Area Number of Items
General Knowledge 4
Plan Reading 4
Exterior Tile Installation 4
Tile Cutting and Drilling 2
Indoor Tile Installation 15
Shower Pans (Including Seats, Shelves,
Accessories, and Troubleshooting) 10
Shower or Tub Installation 3
Tile and Marble Restoration 2
Safety and Employee Protection 6
REFERENCE LIST
The reference material listed below was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
Federal Regulations
Guide to Flooring
Setting Specifications for the Installation of Ceramic Tile
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER:
HEAVY RAILROAD CONSTRUCTION CONTRACTOR
Number of Questions - % Required to Pass - Time Allowed
50 70% (35 Correct) 120 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Erosion and Sedimentation Control 2
Track Construction 5
Concrete Railway Structures 3
Safety 7
Sitework 5
One Call 2
Estimating 2
Welding 2
Tunnelling 3
Concrete 7
Metals Including Concrete Reinforcement 3
Piles 5
Pre-Cast and Pre-Stressed Concrete Erecting 4
REFERENCE LIST
The reference material listed below was used to prepare them questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference materials are allowed in the examination center:
Federal Regulations
Alabama 1Call - Dig Safely
Storm Water Management
Track Safety Standards - Railroad Workplace Safety; and Rules, Standards, and Instructions Governing the Installation, Inspection, Maintenance, and Repair of Signal and Train Control Systems, Devices, and Appliances
Guide to Railway Engineering
Field Book for Concrete Railway Structures
Pipe and Excavation Contracting
Concrete Mixtures
Reinforcing Bars
Guidelines for the Erection of Pre-Cast Concrete Products
Construction Planning, Equipment, and Methods
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER:
HIGHWAYS AND STREETS CONTRACTOR
Number of Questions - % Required to Pass - Time Allowed
80 70% (56 Correct) 220 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Paving-Asphalt 16
Piles 5
Excavation and Grading 12
Concrete Paving 3
Safety 5
One-Call 3
Traffic Control 2
Concrete 8
Metals including Concrete Reinforcement 6
Erosion and Sedimentation Control 6
Tunneling 8
Project Management and Estimating 6
REFERENCE LIST
The reference material listed below was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference materials are allowed in the examination center:
Federal Regulations
Construction Planning, Equipment, and Methods
Pipe and Excavation Contracting
Concrete Mixtures
Hot-Mix Asphalt Paving
Reinforcing Bars
Training and Certification of Field Personnel for Un-bonded Post-Tensioning
Jacked Tunnel Construction
Alabama 1Call - Dig Safely
Storm Water Management for Construction
Uniform Traffic Control Devices for Streets and Highways
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER
HOT AND COLD ASPHALT PLANT MIX PAVING CONTRACTOR
Number of Questions - % Required to Pass - Time Allowed
30 70% (21 Correct) 90 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Bituminous Surface Treatments and Pavements 16
Traffic Control Devices 4
Portland Cement Surface Treatments and Pavements 5
Heavy Equipment/Safety 5
REFERENCE LIST
The reference material listed below was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference materials are allowed in the examination center:
Federal Regulations
Asphalt in Pavement Maintenance
Hot-Mix Asphalt Paving
Uniform Traffic Control Devices for Streets and Highways
Concrete Mixtures
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER
INSULATION CONTRACTOR
Number of Questions
Passing Score - % Required to Pass - Time Allowed
50 70% (35 correct) 120 Minutes
CONTENT OUTLINE
Subject Area Number of Items
General Knowledge and Theory 8
Plan Reading, Materials, Estimating, and Take-Offs 5
Spray-On Application 4
Batt/Roll Insulation 4
Blown or Loose-Fill Insulation (Includes Dense-Packing) 4
Rigid-Board and Reflective Insulation § 2
Ventilation 5
Vapor Barrier and Retarders 4
Safety and Employee Protection 8
Other Insulation Applications 6
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference material is allowed in the examination center
Residential Code for One- and Two-Family Dwellings
Federal Regulations
Insulation
Carpentry and Building Construction
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER
LATH AND PLASTER CONTRACTOR
Number of Questions - Minimum Passing Score - Time Allowed
45 70% (32 correct) 120 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Safety 5
Surface Preparation and Setup 10
Drywall 5
Stucco 5
Application and Installation 8
Base and Finish Coat 7
Plaster and Lathe 5
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference material is allowed in the examination center
Plastering Skills
Federal Regulations
Gypsum Construction
Portland Cement Plaster (Stucco)
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER
LOW VOLTAGE SPECIAL SYSTEMS (UNDER 50 VOLTS)
Number of Questions - Minimum Passing Score - Time Allowed
50 70 (35 correct) 120 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Grounding an Bonding 4
Conductors
Electrical Power Conditioning 2
Electrical and Electronic Knowledge 6
General Low Voltage 3
Sound and Video Systems 5
Intrusion Detection and Alarms 4
Fire Detection and Alarms 7
Computer and Data Systems 5
CCTV Systems 2
Testing Equipment 2
CATV and MATV Systems 2
Applied Systems Design 4
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference material is allowed in the examination center
Electrical Code
Fire Alarm Code
Low Voltage Wiring: Security/Fire Alarm Systems
Telecommunications Wiring
Servicing Alarm Systems
A Comprehensive Guide to P.A. and Music Reinforcement Systems and Technology
Antenna Toolkit
Data, Voice, and Video Cabling
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER
MARINE CONSTRUCTION CONTRACTOR
Number of Questions - Minimum Passing Score - Time Allowed
50 70% (35 correct) 150 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Safety 6
Miscellaneous Engineering - Pile Driving 25
Concrete 15
Concrete - Reinforcing Steel 4
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference material is allowed in the examination center
Federal Regulations
Construction Planning, Equipment, and Methods
Concrete Mixtures
Reinforcing Bars
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER
MASONRY CONTRACTOR
Number of Questions - Minimum Passing Score - Time Allowed
60 70% (42 correct) 180 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Estimating and Plan Reading 4
Unit Masonry 19
Mortar and Grout § 16
Accessories 7
Stone 2
Tools 4
Restoration and Cleaning 4
Safety 4
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference material is allowed in the examination center
Building Code
Federal Regulations
Masonry - Brick, Block and Stone
Building Code Requirements for Masonry Structures
METAL BUILDING ERECTION CONTRACTOR
Number of Questions - Minimum Passing Score - Time Allowed
40 70% (28 correct) 120 Minutes
CONTENT OUTLINE
Subject Area Numbeer of Items
Sitework 3
Concrete 4
Concrete - Formwork 4
Concrete - Reinforcement 4
Masonry 4
Metal - Structural Framing 10
Insulation 3
Metal - Siding and Roofing 4
Safety 4
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference material is allowed in the examination center:
Building Code
Residential Code for One- and Two-Family Dwellings
Federal Regulations
Low Rise Building Systems
Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products
Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
Concrete Construction
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER
METAL STUD AND DRYWALL CONTRACTOR
Number of Questions - Minimum Passing Score - Time Allowed
40 70% (28 correct) 120 Minutes
CONTENT OUTLINE
Subject Area Numbers of Items
Estimating and Plan Reading 6
Materials and Installation 19
Taping 4
Special Applications 6
Safety 5
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference material is allowed in the examination center:
Federal Regulations
Building Code
Residential Code for One- and Two-Family Dwellings
Gypsum Construction
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER
MILLWORK AND FINISH CARPENTRY
Number of Questions - Minimum Passing Score - Time Allowed
30 70% (21 correct) 90 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Fabrication 6
Installation 5
Materials 5
Finishing 4
Hand Tools 3
Safety 3
Machines 2
Plans and Estimating 2
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference material is allowed in the examination center
Federal Regulations
Finish Carpenter's
Guide to Furniture and Cabinet Construction
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER
MUNICIPAL AND UTILITY
Number of Questions - Minimum Passing Score - Time Allowed
90 70 (63 correct) 220 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Excavation and Grading 6
Electrical Power Distribution 10
Fuel Distribution 12
Swimming Pools 4
Concrete and Concrete Reinforcement 12
Shotcrete and Gunite 4
Water and Sewer Piping 15
Communication Systems 5
Boring and Tunneling 4
Erosion and Sedimentation Control 2
Safety 8
One Call 2
Welding 6
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference material is allowed in theexamination center
Federal Regulations
Installation of Aboveground Storage Systems for Motor Vehicle Refueling
Testing Electrical Continuity of Fuel-Dispensing Hanging Hardware
Pressure Piping Code - Gas Transmission and Distribution Piping Systems
Electrical Safety Code
The Lineman's and Cableman's Book
Ductile Iron Pipe Installation
Concrete Pipe & Box Culvert Installation
Pipe and Excavation Contracting
Jacked Tunnel Construction
Erection of Pre-Cast Concrete Products
Welding
Concrete Mixtures
Shotcrete
Storm Water Management for Construction
Alabama 1Call - Dig Safely
Certified Pool-Spa Operators Book
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER
OIL AND GAS FIELDS CONTRACTOR
Number of Questions - Minimum Passing Score - Time Allowed
30 70% (21 correct) 120 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Tanks and Pipelines 12
Miscellaneous Structure/Corrosion Protection 6
Welding 4
Heavy Equipment/Safety 4
Paving and Surfacing 4
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference materials are allowed in the examination center
Federal Regulations
49 CFR Parts 178-199 (Transportation
Rigging for Construction and Industrial Operations
Hot-Mix Asphalt Paving
Welding
Pipe and Excavation Contracting
Construction of Large, Welded, Low-Pressure Storage Tanks
Welded Steel Tanks for Oil Storage
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER
PAINTING AND WALL COVERING CONTRACTOR
Number of Questions - Minimum Passing Score - Time Allowed
50 70% (35 correct) 120 Minutes
CONTENT OUTLINE
Subject Area Number of Items
General Knowledge 16
Materials and Application 18
Wall Coverings 6
Safety and Employee Protection 10
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference materials are allowed in the examination center
Federal Regulations
Painting & Decorating
Painting and Decorating Skills
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER
PIPELINES CONTRACTOR
Numbers of Questions - Minimum Passing Score - Time Allowed
60 70% (42 correct) 150 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Excavation 8
Tank and Vaults 12
Piping, Pumps, and Controls 12
Troubleshooting and Maintenance 2
Safety and Fire Prevention 8
Leak Detection and Monitoring Systems 3
Erosion and Sedimentation Control 3
One Call 3
Estimating (different than clone) 2
Survey and Layout (different than clone) 1
Gas 6
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference materials are allowed in the examination center
Federal Regulations
Alabama 1Call - Dig Safely
Storm Water Management for Construction
Flammable and Combustible Liquids Code
Motor Fuel Dispensing Facilities and Repair Garages
Installation of Underground Liquid Storage Systems
Installation of Aboveground Storage Systems for Motor Vehicle Refueling
Testing Electrical Continuity of Fuel-Dispensing Hanging Hardware
Pressure Piping Code - Gas Transmission and Distribution Piping Systems
Pipe and Excavation Contracting
The definitive dictionary of terms used in petroleum marketing operations
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER
PRE-CAST AND PRE-STRESSED CONCRETE CONTRACTOR
Number of Questions - Minimum Passing Score - Time Allowed
50 70% (35 correct) 120 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Safety 5
Concrete Earthwork 3
Concrete 11
Concrete Reinforcement 9
Concrete Formwork 8
Concrete Cutting 3
Pre-cast Pre-stressed Concrete Erecting 6
Grouting 2
Embeds, Bolting, and Bearing Plates 1
One Call 2
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference materials are allowed in the examination center
Federal Regulations
Building Code
Alabama 1Call - Dig Safely
Formwork for Concrete
Concrete Mixtures
Saw Cutting Joints in Concrete
Sawcutting Concrete Flatwork
Taking the Tedium Out of Cutting
Tips for Cutting Concrete
Erection of Pre-Cast Concrete Products
Placing Reinforcing Bars
The following reference materials are allowed in the examination center
POWER PROJECTS AND PLANTS CONTRACTOR
Number of Questions - Minimum Passing Score - Time Allowed
50 70% (35 correct) 120 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Transformers 6
Electrical Knowledge 6
Conductors 8
Overhead Lines 5
Underground Lines 3
Equipment and Safety 10
Grounding Methods 4
Service Drops and Laterals 2
Poles and Structures 3
Electric Supply Stations 3
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference materials are allowed in the examination center.
Federal Regulations
Electrical Safety Code
Electrical Code Handbook
American Electricians Book
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER
REMODELING, ALTERATION, AND MAINTENANCE CONTRACTOR
Number of Questions - Minimum Passing Score - Time Allowed
60 70% (42 correct) 120 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Safety 6
Windows and Doors 3
Rough Carpentry 16
Finish Carpentry 16
Siding 3
Drywall 2
Concrete 7
Masonry 7
REFERENCE LIST
The reference material listed below was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference materials are allowed in the examination center
Federal Regulations
Carpentry and Building
Finish Carpenter's Book
Building Code
Concrete Mixtures
Masonry - Brick, Block and Stone
Guide to Furniture and Cabinet Construction
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER.
ROOFING AND SHEET METAL CONTRACTOR
Number of Questions - Minimum Passing Score - Time Allowed
60 70% (42 correct) 150 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Estimating and Plan Reading 10
Surface Preparation and Planning 8
Steep and Low Slope Roofing, including BUR, Waterproofing 27
Roofing Components 9
Safety 6
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference material is allowed in the examination center
Federal Regulations
Building Code
Residential Code for One- and Two-Family Dwellings
Roofing Construction and Estimating
Roofing Steep Slope Roof Systems
Roofing Membrane Roofing Systems
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER
RUNWAY CONTRACTOR
Number of Questions - Minimum Passing Score - Time Allowed
30 70% (21 correct) 75 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Sitework 10
Runways 15
FAA Regulations 3
Lighting 2
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference material is allowed in the examination center
Soils and Foundations
Specifications for the Construction of Airports - FAA Advisory
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER:
SEWER PROJECTS CONTRACTOR
Number of Questions - Minimum Passing Score - Time Allowed
50 70% (35 correct) 120 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Sewers 15
Septic Tanks and Drain Fields 10
Excavating and Grading 15
Safety 10
REFERENCE LIST
The reference material listed below was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference material is allowed in the examination center:
Plumbing Code
Federal Regulations
Construction of Urban Stormwater Management Systems
Pipe and Excavation Contracting
Alabama State Board Health, Alabama Department of Public Health, Bureau of Environmental Services, Division of Community Environmental Protection, Administrative Code
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER
SITEWORK CONTRACTOR
Number of Questions - Minimum Passing Score - Time Allowed
40 70% (28 correct) 120 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Estimating and Plan Reading 4
Equipment and Technique 6
Compaction 10
Soil Types 10
Specialty Work (Blasting, Shoring) 6
Safety 4
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference material is allowed in the examination center
Federal Regulations
Pipe and Excavation Contracting
Building Code
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER
SPECIAL COATINGS AND WATERPROOFING CONTRACTOR
Number of Questions - Minimum - Passing Score - Time Allowed
40 70% (28 correct) 120 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Asses Problem 5
Perform Site and Structure Evaluation 5
Identify Resources Needed and Prepare Estimate 5
Excavation and Fill 5
Install Drainage System 7
Damproofing and Water Proofing 12
Safety and Employee Protection 11
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference material is allowed in the examination center
Federal Regulations
International Residential Code for One- and Two-Family Dwellings
Pipe and Excavation Contracting
Construction Waterproofing
Alabama 1Call - Dig Safely
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER:
STRUCTURAL AND MISCELLANEOUS STEEL CONTRACTOR
Number of Questions - Minimum Passing Score - Time Allowed
40 70% (28 correct) 120 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Materials 10
Rigging 8
Steel Erection 10
Attachment 8
Safety 4
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference material is allowed in the examination center:
Rigging for Construction and Industrial Operations
Erection of Steel Joists and Joist Girders
Principles Commercial Construction
Federal Regulations
Construction with Steel Deck
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER
TELECOMMUNICATIONS CONTRACTOR
Number of Questions - Minimum Passing Score - Time Allowed
45 70% (32 correct) 120 Minutes
CONTENT OUTLINE
Subject Area Number of Items
MATV and Cable TV Systems 7
Antennas 7
Foundations / Concrete 8
Steel Erection / Welding 8
Safety 6
Erosion and Sedimentation Control 2
One Call 2
Underground Cabling 2
Hoisting (different than clone) 2
Sitework (different than clone) 1
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference material is allowed in the examination center
Federal Regulations
Alabama 1Call - Dig Safely
Storm Water Management for Construction
Rigging For Construction and Industrial Operations
Antenna Toolkit
Concrete Mixtures
Welding
Pipe and Excavation Contracting
Data, Voice, and Video Cabling
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER
TUNNEL CONTRACTOR
Number of Questions - Minimum Passing Score - Time Allowed
60 70% (42 correct) 150 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Boring and Tunneling 22
Sitework 6
Concrete 10
Concrete Reinforcement 5
Hoisting and Rigging 5
Safety 5
One Call 2
Erosion and Sedimentation Control 2
Survey and Layout (different than clone) 1
Estimating (different than clone) 2
REFERENCE LIST
The reference materials listed below were used to preparethe questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference material is allowed in the examination
Federal Regulations
Alabama 1Call - Dig Safely
Storm Water Management for Construction
Rigging for Construction and Industrial Operations
Pipe and Excavation Contracting
Jacked Tunnel Construction
Construction Guidelines for Micro-tunneling
Estimating for Underground Transit: Too Dangerous to "Guesstimate?
Concrete Mixtures
Training and Certification of Field Personnel for Un-bonded Post-Tensioning
Reinforcing Bars
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER.
WATER PROJECTS CONTRACTOR
Number of Questions - Minimum Passing Score - Time Allowed
50 70% (35 correct) 120 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Safety 6
Shotcrete 5
Concrete 8
Concrete Reinforcement 7
Excavation and Grading 7
Water Regulation Sand Water Tanks and Piping 7
One Call 2
Erosion and Sedimentation Control 2
Formwork 6
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference material is allowed in the examination center
Federal Regulations
Pipe and Excavation Contracting
Concrete Mixtures
Shotcrete
Reinforcing Bars
Formwork for Concrete
AL Dept of Environmental Management Water Division Water Supply Program 335-7
Alabama 1Call - Dig Safely
PVC Pipe Installation
Steel Water-Storage Tanks
Storm Water Management for Construction
Contractor School Online (CSO) will assist you with their professional consultants and provide study materials, also practice tests for the Business, Law and Management, trade if available. If purchases are made elsewhere make sure the correct author, title and year are appropriate for the trade. CSO Business, Law and Management Practice Test coincides with the required State Contractor?s Manual.
Please note: Inventory Pricing - Contractors State Bonding and Subjects may change without notice.
|
